With the help of latest and authentic Cisco CCNP Wireless 642-732 dumps exam questions, you can find the best 642-732 exam preparation kit here and you will also get the 100% guarantee for passing the Cisco https://www.leads4pass.com/642-732.html exam. “Conducting Cisco Unified Wireless Site Survey (CUWSS) v2.0” is the name of Cisco CCNP Wireless 642-732 exam dumps which covers all the knowledge points of the real Cisco exam.
Download Cisco CCNP Wireless real 642-732 dumps exam questions and verified answers. 642-732 CUWSS – Cisco 100% passing guarantee and full refund in case of failure. Latest Cisco Others 642-385 dumps exam questions and answers update Cisco 642-385 dumps vce youtube free shared. The best useful Cisco CCNP Wireless real 642-732 dumps vce software online update free try.
Latest Cisco 642-732 dumps pdf materials: https://drive.google.com/open?id=10-vnCsAIXhyBS9k4-I-RFFH_wqmrBRXf
Latest Cisco 642-737 dumps pdf materials: https://drive.google.com/open?id=1HLwuo1hYBEalnSOYwaz-9t1m5R7mRpOq
Best Cisco CCNP Wireless 642-732 Dumps Exam Questions And Answers (Q1-Q20)
QUESTION 1
What are the most appropriate channels for an 802.11a/n VoWLAN survey and deployment in the FCC domain?
A. 4 channels of UNII-1
B. 8 channels of UNII-1, and UNII-2
C. 8 channels of UNII-1, and UNII-3
D. 15 channels of UNII-2, and UNII-2 extended
E. 23 channels of UNII-1, UNII-2, UNII-2 extended, and UNII-3
F. 24 channels of UNII-1, UNII-2, UNII-2 extended, UNII-3, and ISM
Correct Answer: C
QUESTION 2
You have a multinational customer that would like you to perform a wireless site survey for a new manufacturing facility in Singapore. They have had a local vendor install a point-to- point wireless bridge link between two buildings 1 km apart.
The ground between the buildings is flat but because facilities are in the mountains, dense fog is an issue. There are no line of sight issues between the buildings. The link is experiencing errors and throughput issues. Currently the two radios are set to operate at 2.4 GHz and the transmit power is set to 7 dBm with 7 dBm antennas. What do you need to take into consideration when performing the site survey for this link?
A. Change the radio power to 17 dBm.
B. Change the radio power to 20 dBm and replace with a 16 dBm antenna.
C. Change the radio power to 29 dBm.
D. Change the radio power to 13 dBm.
Correct Answer: D
QUESTION 3
Which hop count is Cisco’s maximum recommended for a client in a wireless Mesh network?
A. 2
B. 4
C. 6
D. 8
Correct Answer: B
QUESTION 4
Which two statements best describe the Fresnel zone related to an outdoor RF point-to- point link? (Choose two.)
A. blocks no more than 20 percent
B. blocks no more than 40 percent
C. blocks no more than 60 percent
D. comprises a single zone to keep clear
E. comprises multiple zones of which the first inside zone is the most important to keep clear
F. comprises multiple zones of which the outside zone is the most important to keep clear
Correct Answer: BE
QUESTION 5
Given an AP that can transmit at 100 mW and the client at 40 mW, which power setting should be used for a site survey?
A. 10 mW
B. 20 mW
C. 40 mW
D. 60 mW
E. 80 mW
F. 100 mW
Correct Answer: B
QUESTION 6
When ordering the software licenses for a Cisco WLAN project, what are the minimum software packages required if the location requires 390 lightweight APs, 100 of which will be used for location services, and a Cisco 3310 MSE?
A. One 500 AP single server license package for the WCS and one 3000 device license for the MSE.
B. One 1000 AP single server license package for the WCS and one 500 device license for the MSE.
C. One 1000 AP single server license package for the WCS and one 3000 device license for the MSE.
D. One 500 AP single server license package for the WCS and one 1000 device license for the MSE.
E. One 1000 AP single server license package for the WCS and one 2000 device license for the MSE.
Correct Answer: A
QUESTION 7
Which two statements best describe the Fresnel zone related to an outdoor RF point-to- point link? (Choose two.)
A. single elliptical area surrounding an RF line of sight
B. multiple elliptical areas surrounding an RF line of sight
C. extends vertically
D. extends horizontally
E. extends three-dimensionally
Correct Answer: BE
QUESTION 8
An engineer is conducting a site calibration using Cisco WCS. 642-732 dumps The current network has 802.11a, 802.11b, 802.11g, and 802.11n devices. How many times should the calibration be done?
A. once for each band
B. once for each protocol
C. once per deployment
D. once using each data collection type
Correct Answer: A
QUESTION 9
An engineer is performing a data collection to validate wireless coverage. At what two locations should a linear point collection be performed? (Choose two.)
A. office cubicles
B. private offices
C. auditorium
D. warehouse
E. conference rooms
Correct Answer: CD
QUESTION 10
What three pieces of information should be included in an installation report? (Choose three.)
A. software versions of each AP
B. configuration files for each WLC
C. switch connection for each MAP
D. license file for each RAP
E. radio status for each AP
F. mobility group name for each WLC
Correct Answer: ABE
QUESTION 11
A company has requested an indoor wireless survey in a multi-tenant building for 2.4GHz data and 5GHz voice services. Data clients will require three spatial streams and 4×4 MIMO technology. What is the Cisco recommended Access Point for performing this survey?
A. 600
B. 1600
C. 2600
D. 3600
Correct Answer: D
QUESTION 12
Refer to the exhibit. During a post Mesh deployment survey, an engineer notices frame collisions occurring when MAP-1 and MAP-3 talk to RAP-2. Which type of issue is the engineer observing?
A. hidden node
B. exposed node
C. co-channel interference
D. CSMA-CA
E. backhaul latency
Correct Answer: A
QUESTION 13
You have a customer that is renovating a historic building for a new headquarters. The building was once an old manufacturing plant. It is constructed of brick with heavy timber beams. What type of RF issues do you expect to see while performing the site survey?
A. The RF signal will be reflected by the brick walls.
B. The RF signal will be absorbed by the brick walls and wooden beams and floors.
C. The RF signal will be diffused by the brick walls and wooden beams and floors.
D. The brick walls and wooden beams and floors will cause the RF signal to be diffracted.
Correct Answer: B
QUESTION 14
An engineer notes that some areas of a floor fail when using the Location Readiness Tool in Cisco WCS. What criteria must be met for a point to be considered location ready?
A. one AP in each quadrant, with three less than 70 feet away
B. one AP in three quadrants, with two less than 70 feet away
C. one AP in each quadrant, with two less than 70 feet away
D. one AP in three quadrants, with one less than 70 feet away
Correct Answer: A
QUESTION 15
You have a customer that operates a large open pit coal mine in the western United States. They need to deploy a wireless point-to-point bridge link across the mine. The distance of the link is 1.5 miles. Which three things do you need to consider prior to performing the site survey for this bridge link? (Choose three.)
A. What specific EPA training will be required prior to entering the customer site?
B. Is a specific Mine Safety and Health Administration training course and certificate required prior to entering the customer site?
C. What specific FCC training will be required prior to entering the customer site?
D. Will any specialized equipment or clothing will be required to perform the site survey?
E. Will customer escorts be needed during the site survey?
Correct Answer: BDE
QUESTION 16
What are the best practice minimum and recommended signal level values for a Location Services Survey?
A. minimum: -65dBm; recommended: 60 dBm
B. minimum: -70dBm; recommended: -68 dBm
C. minimum: -75dBm; recommended: -72dBm
D. minimum: -80dBm; recommended: -78dBm
Correct Answer: C
QUESTION 17
Which three post-installation checks should an engineer perform after a new wireless installation? (Choose three.)
A. Check for co-channel interference.
B. Check for adequate signal levels as surveyed.
C. Conduct a passive survey of 802.11a and 802.11b.
D. Conduct a passive and active survey of each media type in use.
E. Verify that the minimum data rate is 24 Mbps.
F. Verify that the cell overlap is 20%.
Correct Answer: ABD
QUESTION 18
Refer to the exhibit.
A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. 642-732 dumps Which option is the maximum allowed power setting for all four bridges?
A. B1=12dBmB2=12dBmB3=12dBmB4=12dBm
B. B1=12dBmB2=24dBmB3=24dBmB4=24dBm
C. B1=24dBmB2=12dBmB3=12dBmB4=12dBm
D. B1=24dBmB2=24dBmB3=24dBmB4=24dBm
E. B1=20dBmB2=20dBmB3=20dBmB4=20dBm
F. B1=10dBmB2=24dBmB3=24dBmB4=24dBm
Correct Answer: B
QUESTION 19
In performing a post-deployment audit, you are concerned by significant changes in measured RSSI and SNR values taken on a wireless client in one location. How do you explain the differences in these values?
A. The differences in the RSSI and SNR values are a result of signal diffusion in the environment.
B. The differences in the RSSI and SNR values are a result of multipath in the environment.
C. The differences in the RSSI and SNR values are a result of signal absorption in the environment.
D. The differences in the RSSI and SNR values are a result of signal diffraction in the environment.
Correct Answer: B
QUESTION 20
Which tool can best provide throughput verification?
A. WLC > Monitor > Clients > LinkTest
B. WaveDeploy
C. InSSIDer
D. Xirrus Wi-Fi Inspector
Correct Answer: B
Latest Cisco 642-732 dumps pdf materials: https://drive.google.com/open?id=10-vnCsAIXhyBS9k4-I-RFFH_wqmrBRXf
Latest Cisco 642-737 dumps pdf materials: https://drive.google.com/open?id=1HLwuo1hYBEalnSOYwaz-9t1m5R7mRpOq
The best and most updated latest Cisco CCNP Wireless 642-732 dumps exam practice files and study guides in PDF format download free try. High quality Cisco CCNP Wireless https://www.leads4pass.com/642-732.html dumps pdf training resources which are the best for clearing 642-732 exam test, and to get certified by Cisco CCNP Wireless.
Useful Cisco CCNP Wireless 642-732 dumps vce youtube: https://youtu.be/zFzANuhSdI0